Metal Failure Analysis

 
Length: 5 hours | CEUs: 0.5 | $267

Do you get involved with metal failure analysis and get stuck at the metallurgical evaluation part of the process?  If your answer is yes, this course is for you. This course will teach you how to perform a metal failure analysis.

The concepts you’ll learn are applicable to failures that involve cracked, fractured, or corroded components and joints.  The concepts are also applicable for determining the root cause of manufacturing quality problems.

What you will learn about metal failure analysis

The following aspects of metal failure analysis are taught:

  • The common failure analysis techniques used to analyze metals and the data obtained from the analyses.
  • How to determine failure mode and mechanism.
  • How to select, collect, handle, and prepare samples for failure analysis.
  • The background information required to determine failure mechanism and root cause.
  • The common techniques used for failure analysis and the data obtained.
  • How to determine fracture mode based on the appearance of a fracture surface.
  • How to perform a failure analysis on fracture, corrosion, and manufacturing failures.

10 case studies are used to give learners experience applying the knowledge taught in the course to solve real-life failures.

Course content

The course takes about 6 hours to complete and consists of 11 modules and a final exam.  Also, quizzes and problems give you opportunities to apply the concepts taught.

The module titles are:

  • Module 1: Failure and Root Cause Analysis
  • Module 2: Failure Modes and Mechanisms
  • Module 3: Failure Analysis Process
  • Module 4: Analysis Techniques
  • Module 5: Fracture Modes and Mechanisms
  • Module 6: Fracture Failure Analysis Steps
  • Module 7: Fracture Case Studies
  • Module 8: Corrosion Failure Analysis Steps
  • Module 9: Corrosion Case Studies
  • Module 10: Manufacturing and Assembly Failure Analysis Steps
  • Module 11: Manufacturing and Assembly Case Studies

Click here to see Module 1 slides.

Course certificate

Upon successful completion of the course you will receive a certificate for 6 credit hours (0.6 CEU’s).

Is This Course Right For You?

This course was designed for:

  • Design, manufacturing, and quality engineers.
  • Forensic engineers

 

 

.

  • "A group of us took several courses (Principles of Metallurgy, Metallurgy of Steel, Corrosion of Metals) to become more knowledgeable about the science of metals to avoid problems. For me, the biggest impact of the training was on working with suppliers. I feel more confident asking questions and I now know the suppliers which know their stuff and which ones don’t. And it was great being able to get the training when it was convenient for me."

    Sam Bloodgood, VP Process Improvement, Hydraforce, Inc.
  • "I oversee several operations, including steel heat treating and laser welding. However, my background was in the construction materials industry. Principles of Metallurgy gave me the knowledge to have meaningful discussions with my engineers and be able to ask them better questions."

    Tom Parkman, Plant Manager, Simonds International.
  • “Principles of Metallurgy exceeded my expectations. The content was straightforward enough not to be burdensome, yet deep enough to provide a practical review of fundamental principles. I recommend this course to any engineer or technical person who has been out of school and working in industry for several years, but not necessarily having been focused on metallurgy.”

    Andy Jacobs, Staff Engineer, DePuy Orthopaedics, Inc.
  • “The Principles of Metallurgy course is broke up into convenient length modules that can be fit into the busiest schedule. The course is a good review for engineers who had a materials class ten or more years ago.”

    Paul Flury B/E Aerospace
  • “This is an excellent course (Metallurgy of Steel Heat Treating) for learning basic heat treating practices. The course introduces and covers a broad range of processes. I would recommend it for anyone in the steel business.”

    Jim Marks, Magellan Corporation
  • “This course has given me more confidence in my job and given me a better understanding of some of the heat treatments used in the business.”

    Mark Winter, Abbey Forged Products
Just $267/person
Have more questions? Email mpfeifer@imetllc.com or call 847.528.3467

Why Industrial Metallurgists?

  • Practical, up-to-date content.
  • Metallurgy expertise and 20+ years of experience.
  • Courses designed for non-metallurgists.
  • Training accessible from anywhere with internet access.
  • Engaging content.
  • Convenience. Learn when it suits your schedule.
  • Avoid being overwhelmed with too much information at one time. Set your own pace.