Aluminum Alloy Families: Strength Metallurgy


There are many different types of wrought aluminum alloys used in a wide variety of applications such as wire for power distribution, automobile radiators, airplane fuselage, fasteners, and soda cans. The main criteria for selecting a particular alloy are strength, electrical conductivity, corrosion resistance, ease of manufacturing and assembly, and cost. This article discusses the effects of alloy composition on strength.

There are several families of wrought aluminum alloys. Each family is based on specific major alloying elements added to the aluminum. These alloying elements have a large influence on the properties. The different families of alloys and the major alloying elements are

  • 1xxx: no alloying elements
  • 2xxx: Copper
  • 3xxx: Manganese
  • 4xxx: Silicon
  • 5xxx: Magnesium
  • 6xxx: Magnesium and silicon
  • 7xxx: Zinc and magnesium and zinc, magnesium, and copper

The first number in the alloy designation indicates the particular alloy family. Within each family there are different alloys based on the amounts of the major alloying elements present and the types and amounts of minor alloying elements that have been added.

See metallurgy courses & webinars
Need help with your product?

For the 1xxx group, 10xx is used to designate unalloyed compositions. The last two digits in the designation indicate the impurity content. Designations having a second digit other than zero indicate special control of one or more impurity elements.

For the 2xxx through 7xxx alloy groups, the second digit indicates alloy modification. A second digit of zero indicates the original alloy. Integers 1 through 9 indicate modifications of the original alloy. The last two digits have no special significance other than to identify the different aluminum alloys in the group.

The strength of aluminum alloys can be modified through various combinations of cold working, alloying, and heat treating. All the alloys can be strengthened by cold working processes such as cold rolling or wire drawing. Furthermore, except for 1xxx alloys, additional strength can be obtained by solid solution strengthening, dispersion strengthening, and precipitation strengthening. The particular strengthening mechanism possible depends on the alloy.

Solid solution strengthening occurs in 3xxx and 5xxx alloys through the addition of manganese (3xxx) and magnesium (5xxx). Aluminum can hold more magnesium than manganese in solid solution. Consequently, greater solid solution strengthening is possible in 5xxx alloys than in 3xxx alloys. However, in the 3xxx alloys, the formation of Al-Mn-Si particles results in increased strength. These particles are obstacles to dislocation motion through the metal.

© DoITPoMS Micrograph Library, University of Cambridge.

The alloys can be divided into two groups based on whether the alloys can be precipitation strengthened. The 2xxx, 6xxx, and 7xxx alloys can be precipitation strengthened and the 3xxx, 4xxx, and 5xxx alloys cannot. Precipitation strengthening in 2xxx, 6xxx, and 7xxx alloys occurs through the formation of Al-Cu (2xxx), Al-Mg-Si (6xxx), and Al-Zn-Mg-(Cu) (7xxx) sub-micron sized particles in the alloys. The particles form as a result of a series of heat treating processes and are obstacles to dislocation motion through the metal.

See metallurgy courses & webinars
Need help with a failure analysis?

The yield and tensile strengths possible in the different alloy families depends on the strengthening mechanisms available. The table shows the maximum nominal yield and tensile strengths for the different alloy families and the methods by which the strength is increased. There is a wide range of strengths possible with aluminum alloys.

Data from Aluminum Standards and Data 2009, The Aluminum Association

Data from Aluminum Standards and Data 2009, The Aluminum Association

Selecting a particular alloy requires consideration of other requirements such as electrical conductivity, corrosion resistance, ease of manufacturing and assembly, and cost. A future article will discuss the general properties of the alloys from the different alloy families.

Learn more about the metallurgy of cold working, solid solution strengthening, and precipitation strengthening in our Principles of Metallurgy and Metallurgy of Precipitation Strengthening courses.

  • "A group of us took several courses (Principles of Metallurgy, Metallurgy of Steel, Corrosion of Metals) to become more knowledgeable about the science of metals to avoid problems. For me, the biggest impact of the training was on working with suppliers. I feel more confident asking questions and I now know the suppliers which know their stuff and which ones don’t. And it was great being able to get the training when it was convenient for me."

    Sam Bloodgood, VP Process Improvement, Hydraforce, Inc.
  • "I oversee several operations, including steel heat treating and laser welding. However, my background was in the construction materials industry. Principles of Metallurgy gave me the knowledge to have meaningful discussions with my engineers and be able to ask them better questions."

    Tom Parkman, Plant Manager, Simonds International.
  • “Principles of Metallurgy exceeded my expectations. The content was straightforward enough not to be burdensome, yet deep enough to provide a practical review of fundamental principles. I recommend this course to any engineer or technical person who has been out of school and working in industry for several years, but not necessarily having been focused on metallurgy.”

    Andy Jacobs, Staff Engineer, DePuy Orthopaedics, Inc.
  • “The Principles of Metallurgy course is broke up into convenient length modules that can be fit into the busiest schedule. The course is a good review for engineers who had a materials class ten or more years ago.”

    Paul Flury B/E Aerospace
  • “This is an excellent course (Metallurgy of Steel Heat Treating) for learning basic heat treating practices. The course introduces and covers a broad range of processes. I would recommend it for anyone in the steel business.”

    Jim Marks, Magellan Corporation
  • “This course has given me more confidence in my job and given me a better understanding of some of the heat treatments used in the business.”

    Mark Winter, Abbey Forged Products

Have more questions? Email or call 847.528.3467

Why Industrial Metallurgists?

  • Practical, up-to-date content.
  • Metallurgy expertise and 20+ years of experience.
  • Courses designed for non-metallurgists.
  • Training accessible from anywhere with internet access.
  • Engaging content.
  • Convenience. Learn when it suits your schedule.
  • Avoid being overwhelmed with too much information at one time. Set your own pace.