Brass rivets were cracking during assembly, when the rivets were being set. Failure analysis of the rivets was performed as part of the process to determine the root cause of the cracking.
The rivets were manufactured by machining them from wire stock.
The main requirements for the rivet material were:
Meeting these two requirements put mutually exclusive constraints on the brass composition. Lead is added to improve machining. However lead reduces brass cold forming properties. The alloy selected had 0.9 to 1.5 % Pb.
Stereo zoom microscope (up to 70x) examination revealed that rivets were cracking at the portion deformed during the rivet setting process, when two components were being joined. A photo of a cracked rivet and a video animation of the rivet setting process are below.

Composition analysis of rivets was also performed to try to understand why some lots of rivets were ok and other lots cracked. The analysis results indicated that the rivets that did not crack had less lead than the cracked rivets.

The root cause of the cracking was poor design. A new alloy was selected that had lower Pb and the problem did not occur again.
Interested in learning more about failure analysis and root cause analysis? Check out our Metal failure analysis online course.
Also, see our YouTube Channel for videos on different topics of metallurgy and metallurgical engineering for product design, manufacturing, and failure analysis
Finally, we offer failure analysis services. If you need help with a quality problem or component failure, let's talk for 15 minutes. Use this brief form to get started.

Michael Pfeifer, Ph.D., P.E. is President of Industrial Metallurgists and a metallurgical engineering consultant with more than 30 years of experience in product design, manufacturing, failure analysis, and metallurgy training. He helps clients worldwide solve design and manufacturing problems and is the author of Materials Enabled Designs.