Mechanical Properties of Metals

Mechanical properties of metals

For almost all engineering applications, metals must have mechanical properties capable of enabling components to perform as needed. For any component, specifying the appropriate mechanical properties and their values is critical for designing products and structures that function as needed. To do this, knowledge of what the properties mean, how they are measured, and how they are influenced by metallurgical and other factors is needed. This article provides and overview of these things, with links to other resources that cover topics in more detail.

If, after reading this article, you'd like to learn more about mechanical properties, see our video Mechanical Properties.

metal mechanical properties measurement equipment

See our metallurgy courses and metallurgy training. For anyone in product design and manufacturing.

Common mechanical properties

Commonly specified mechanical properties are yield strength, tensile strength, elongation, hardness, fracture toughness, impact toughness, and fatigue strength. Their engineering significance and how they are measured are discussed below. However, the first topic covered is dislocations because the behavior of these microscopic features of metals are the basis of metal mechanical properties.

Dislocations

Dislocations are line defects in a metal's crystal lattice. Dislocations move through a metal when the stress applied to the metal is large enough. Metal strength and other mechanical properties depend on the ability for dislocations to move through a metal.

Any specific metal - iron, aluminum, copper, and so on - has inherent mechanical properties based on the behavior of dislocations and ease of dislocation motion in the metal, which are influenced by the arrangement of atoms and the strength of atomic bonds between atoms. Ease of dislocation motion through any metal can be modified using several approaches including adding alloying elements, cold working, annealing, grain size, modifying phase microstructure by heat treating, and the number of non-metallic inclusions in the metal. Thus, using these techniques enables us to engineer metals to meet specific mechanical properties requirements.

To learn more about dislocations read this article and get access to the 30-minute webinar recording Five Key Metallurgy Concepts. Also, dislocations and more details about approaches for metal strengthening are covered in our online course Principles of Metallurgy.

Yield strength and tensile strength

Yield strength and tensile strength are important mechanical properties for applications where a component has an applied load. Yield strength is the stress required to cause permanent deformation of a metal. It is a measure of the stress required for dislocations to start to move through a metal. Since it is undesirable for components to deform during use, a metal's yield strength must be greater than the maximum applied stress on a component. Tensile strength is the maximum stress a metal can support before it starts to crack. Both are measured by pulling a metal in tension during a tensile test.

tensile testing metallurgy course

Tensile strength is important for component fabrication using bending, stamping, drawing, and other cold forming operations that involve plastic deformation of the metal. In these situations, it is important for a metal's tensile strength to be high enough so the metal does not crack or fracture during component fabrication. relevant for quality control to ensure that stock metal or metal components were fabricated properly.

Learn more about metal strength in our article Metal Strength and video Metal Strength. To learn more about tensile testing see our online course Tensile Testing.

Elongation and ductility

Elongation is a measure of a metal's ductility, or how much it can stretch before breaking. It is measured as the total percentage change of the length of a tensile test specimen during tensile testing (see our online course Tensile Testing). Elongation is important using cold forming processes such as bending, drawing, and stamping to fabricate components from metal stock such as sheet, plate, tubing, and wire. As elongation increases, the amount of deformation before a metal cracks increases. It is not good if components crack during fabrication.

In addition to the metallurgical factors that influence elongation, the conditions to which a metal is exposed also affect elongation. Higher temperatures often increase a metal's elongation. Strain rate is the speed at which a metal is stretched, and slower strain rates tend to result in higher elongation.

Hardness

Hardness refers to a material's resistance to localized plastic deformation when an indentor is pressed into a metal's surface. It measures a metal's resistance to being scratched, dented, or penetrated. Harder metals are more difficult to scratch, dent, or cut. Hardness is important for wear applications such as gears, sliding parts, and parts exposed to impact from hard particles. It is also an indication of metal strength for many alloys.

Brinell hardness tester for metal hardness measurement

Several methods are used to measure metal hardness, including Brinell, Rockwell, and Vickers hardness tests. All involve pressing an indentor (hard ball or diamond) into the metal surface with a known force and measuring the size of the resulting indentation.

To learn more about metal hardness, read these articles: Metal Hardness and Specifying Metal Hardness - Is it Enough? To learn more about hardness testing, see our online course Hardness Testing.

Fracture toughness

Fracture toughness is a measure of a metal's resistance to sudden, brittle fracture when a crack is present in the metal. This is especially important in components that form fatigue cracks under cyclic loading, components with manufacturing flaws, and components with design features that are stress concentrations. Fracture toughness is measured on specimens with pre-existing cracks. Common units for fracture toughness are MPa√m.

Stress intensity is a calculated value used to predict the stress state near a crack tip. As a crack in a metal grows, the stress intensity at the crack tip increases. If the stress intensity exceeds the metal's fracture toughness, the metal will fracture suddenly. Also, for components with manufacturing flaws and design features that are stress concentrations, if the the stress intensity at the flow or concentration exceeds the metal's fracture strength, the metal will crack and fracture.

Toughness is a combination of strength and ductility. A metal with good strength and ductility will have good toughness. For any particular alloy, there are trade-offs between strength and toughness, as discussed in this article and video. Unfortunately, design engineers often make the mistake of increasing an alloy's strength to try to increase its toughness, only to learn that they've made matters worse.

Impact toughness

Impact toughness indicates a material's capacity to absorb the energy of an impact and its resistance to brittle cracking or fracture when subjected to impact loads. Impact toughness measurement is used as a quality control method to assess notch sensitivity and for comparing the relative toughness of engineering materials.

The impact toughness or impact strength of a metal can be determined with a Charpy or Izod test. These involve fabricating a test specimen, placing it on the tester's sample holder, and releasing a heavy pendulum that strikes the test specimen. The amount of energy adsorbed by the test specimen is read on a gauge on the tester and is the materials impact toughness or impact strength.

Impact toughness is influenced by strain rate (rate of loading) and temperature. In general, toughness decreases as the rate of loading increases and as a metal's temperature decreases.

Fatigue strength

Fatigue strength is the maximum stress a material can withstand for a specified number of loading cycles without experiencing failure due to repeated loading, essentially representing the material's resistance to fatigue failure under cyclic stress conditions.

The fatigue limit or endurance limit is the stress level below which an infinite number of loading cycles can be applied to a material without causing fatigue failure. Ferrous alloys and titanium alloys have a distinct limit. Alloys such as aluminum and copper do not and will eventually fail even from small stress amplitudes. Where materials do not have a distinct limit the term fatigue strength is used and is defined as the maximum value of completely reversed bending stress that a material can withstand for a specified number of cycles without a fatigue failure

Metal Fatigue video and Improving Fatigue Resistance video. Preventing Metal Fatigue webinar video. Article on Fatigue

Engineering mechanical properties

Metals must have mechanical properties capable of enabling components to perform as needed. Specifying the appropriate mechanical properties and their values and being able to engineer metals to meet the requirements are all critical for designing products and structures that function as needed. This article and the resources mentioned will hopefully help you understand the properties and how they can be engineered. If you'd like to learn more about engineering metal mechanical properties, read Engineering the Properties of Metals.

See our YouTube Channel for videos on different topics of metallurgy and metallurgical engineering for product design, manufacturing, and failure analysis.

Metallurgy help

Finally, we offer metallurgy consulting to help with design and manufacturing decisions and problems. If you need help, let's talk for 15 minutes. Use this brief form to get started.

About the author

Michael Pfeifer, Ph.D., P.E. is President of Industrial Metallurgists and a metallurgical engineering consultant with more than 30 years of experience in product design, manufacturing, failure analysis, and metallurgy training. He helps clients worldwide solve design and manufacturing problems and is the author of Materials Enabled Designs.

Did you enjoy this article?

If yes, sign-up to receive notices about new metallurgy content - articles, videos, courses, and webinars - and special offers. We send only one email a week.

Industrial Metallurgists, LLC

Providing metals engineering expertise for failure analysis and forensic investigations of metal components and products.
© 2026 imetllc.com — All rights reserved.